Drinking Water Filling Machine
2. Filling heads:14-12-5
3. Bottle type(ml):250-2500
This Automatic CGF Wash-filling-capping 3-in-1 Water Filling
Machine is used to produce bottled mineral water, purified water,
alcoholic beverage and other non-gas Liquid.
This Machine can be applied to all kinds of plastic machine such as
PET, PE. Bottles size can vary from 200ml-2000ml meanwhile few
changeover is needed.
This model of filling machine is designed for the low/middle
capacity and small factory. It takes low buying cost, low water and
electricity consumption and few space occupation into consideration
at the beginning.
At the same time it can perfectly complete the function of washing,
filling and capping. It improves the sanitary conditions and
simplifies the maintenance compared with the last generation water
|Number of washing, filling and capping heads||14-12-5||16-16-6||24-24-6||32-32-8||40-40-10||50-50-12||60-60-15||80-80-20|
|suitable bottle specification(mm)||φ=50-110 H=170 volume=330-2250ml|
|Main Motor power(kw)||2.2kw||2.2kw||3kw||5.5kw||7.5kw||11kw||15kw||19kw|
1. intelligent contact screen, human design, easy operation.
2. Imported filling valve, avoiding drop leaking, accurate filling
3. Program logic controller(PLC), easy for changing size or
4. Pneumatic elements are all imported, stability and reliability.
5. Accurate liquid sensing, automatically adding liquid, ordinary
pressure flow passage parameters
6. Solely and specially-designed whole lifting device, easy
governing to meet the needs of all kindsof container packing
7. Photo-electric sensing and pneumatic linking control, automatic
protection for shortage of bottle.
8. Pneumatic executive control valve, high efficiency and safety.
Each flow passage can be separately governed and cleaned.
9. Close positioning design, easy governing, suitable for packing
of all sizes of bottles.
10. The whole machine is designed according to requirements of