ABS PP PE hospital furniture medical headboard guardrail making
machine blow molding machine TDB-80F
● High-hardness alloy coating screw driven by SIEMENS motor for
plasticizing capacity 160KG.
● Diagonal tie bar central clamping structure, driven by worm motor
for easy changing mould.
● Accumulating head with good material runner design and refined
metal surface process.
● Updated hydraulic system with servo motor system for energy
saving to lower your cost.
● Adopt high speed total machine control system with 100 point
parison thickness control.
● Bottom blowing system, parison expanding or sealing device, motor
driving robot included.
Extrusion blow moulding machine specification:
|Max. Product Volume||(L)||80L|
|Screw L/D ratio||(L/D)||25|
|Screw drive power||(KW)||45|
|Screw heating capacity||(KW)||8.4~10.5|
|No. of heating zone||(ZONE)||4|
|Max.Output of HDPE||(Kg/hr)||160~200|
|Oil pump drive power||(KW)||37|
|Mold stroke (Platen distance)||(mm)||500~1200|
|Max. Size of Mold(W*H)||(mm)||800*1000|
|Capacity of the diehead||(L)||12.8|
|Max. Die diameter||(mm)||420|
|Die heat capacity||(KW)||9.2|
|No. of heating zone||(ZONE)||5|
|Cooling water pressure||(Mpa)||0.3|
|Size of machine ( L*W*H)||(m)||5.42*2.45*3.9|
|Weight of machine||(TON)||16|
Extrusion blow molding machine technical feature:
The electronic control system: Japan's Mitsubishi PLC computer and
human-machine interface (English or Chinese) control, color
touch-screen operation. All the process set to change, retrieval,
monitoring, troubleshooting and other functions are implemented on
the touch screen, no point of contact with the working principle,
components and durable.
The hydraulic system: proportional pressure control, with imported
brands Yuken hydraulic components, stable and reliable.
The plasticizing system: efficient plastics mixing screw, to ensure
plasticizing full uniform.
The speed control system: VVVF + alloy steel and hard gear reducer,
speed stable, low noise, durable.
The opening and closing mold, mold transfer system: beam arm, three
position, center locking clamping mechanism, to ensure long-term
use. Clamping force balance, no deformation, the use of body
translation mode (ball linear guide), high precision, low
Blowing the needle holder: blow the whole Square-type needle
holder, a solid does not shift to ensure a smooth incision
a) Hydraulic Parts
|Oil Pump||PARKER or SUNNY, America|
|Valve||YUKEN or SUNNY|
|Hose, Joint||PARKER SIR|
|Sealer||Top DZ Europe|
b) Electrical Parts
|Microcomputer Control System||MITSUBISHI PLC, Japan|
|Touch Screen||HITECH color screen, Taiwan|
|Temperature Controller||MITSUBISHI, Japan|
|Motor||SIMENS BEIDE Asynchronous Motor|
|Power Resource||MEAN WELL, Taiwan|
c) Pneumatic Parts
|Solenoid Valve||FESTO, Germany|
Extrusion blow molding machine installation, commissioning and
If the buyer needs seller to send technicians to workshop for
supervising the erection and start-up, seller must support and send
sufficient number of technicians and keep duration of stay in
workshop. Usually it's about 3~5 days in this duration. The first
day is that when our technician is at the airport to factory of
buyer. And from the first day, the buyer has to pay US$80 per day.
And all accommodation, visa application & air ticket will be
born by the buyer.